怎樣把AV設備的布線工作做好

AV的信號輸出包括視頻、左聲道和右聲道，一般AV設備都會放置在客廳里，若需要在各房間里欣賞AV影音設備播放的影音，就需要通過家庭綜合布線，將上述三種線路連接到各房間。

怎樣把AV設備的布線工作做好

1. AV系統需同時布三條線纜，插座面板是三孔AV接口，信息接入箱中採用AV模塊面板，總接入影音中心的AV信號，分接出其他房間;

2. 房間的各組三線分別接入AV模塊面板後面的各組接線柱，通過面板的撥位開關實現接通或關閉;

3. 由於AV系統原則上不允許布線線路中經過接續，但為了共享和美觀，若使用環境要求非「發燒級」，可選擇足夠好的線材抵消部分的不足。

* * * * * *

創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。

想了解更多關於「怎樣把AV設備的布線工作做好」的內容，請瀏覽創世官網：http://livservices.com.hk

地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室

電話：852-31063235

——————

How to do the wiring work of AV equipment

1. The AV system needs to be equipped with three cables at the same time. The socket panel is a three-hole AV interface. The AV module panel is used in the information access box. The AV signal of the audio-visual center is always connected to other rooms.

2. Each group of three lines of the room is connected to each group of terminals behind the AV module panel, and is turned on or off through the dial switch of the panel;

3. Since the AV system does not allow the connection in the wiring line in principle, but for sharing and aesthetics, if the environment requirements are not “fever grade”, you can select a sufficient enough line to offset the shortage.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'How to do the wiring work of AV equipment'，please visit : http://livservices.com.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235